How To Choose The Right Hammer Drill Bits
A Hammer drill is among the most essential tools you could have in your toolbox. Whether you’re a dedicated DIYer or a week-end do-it-yourself warrior, you’ll most likely work with a Hammer drill more than you’ll use some other basic tool. The drill’s flexibility is available by various attachable bits – each and every uniquely suitable for a certain material or job. Bits are usually intimidating. Learning many available will let you pick the best one.
Choosing by Type
Hammer Drill bits are first organized based on the medium which they may be used, then by material. For this reason, you’ll find bits labeled to use on wood, masonry (brickwork), and metal. Once you’ve recognized your carrier and material, you’ll pick the size that fits your specific needs.
Wood Drill Bits
It may be recognized by a small, specific tip at the end. In case you take a close look, you will see spurs on both sides. These seize wood, carve it away. Steel bits are ideal for softwood types; hardwoods will ultimately dull them. Titanium-coated wood drill bits last for a long. The wood drill bit is a very versatile and popular hammer drill bit.
Masonry Drill Bits
These bits possess a lightly sloping tip. Occasionally, the end of masonry bits is protected in carbide, which extends their sharpness. A masonry bit is most effective with natural stone and cinder block, and it can deal with some tile too. It’s extremely durable and – with plenty of effort – can get your preferred photo hung on a difficult surface such as a brick wall.
Metal Drill Bits
These use a wide-angled position at the end, and they also painted black. If you’re buying new steel drill bits, obtain a label with all the names of high-speed steel (HSS). These hammer drill bits are exceptionally versatile. Higher priced metal bits might have a titanium layer coat or contain cobalt. Steel bits will drill thru soft aluminum, though high-speed steel is necessary for other steel types.
These Hammer Drill bits have pilot hole charts to assist you to find out the right bit to do the job. These charts depend on the shank of the screw and so are meant to be applied only as suggestions:
- Use a bit precisely the same size as the pit whenever working on other stuff.
- Work with a bit 1/64” smaller compared to the marked hole size for soft-woods.
- If you’re not certain which one to select, go with a hammer drill bit 1/64” bigger than the hole you intend to create. This will be the cause of variables such as wood thickness and screw type.
Focusing on how to choose the proper hammer drill bit takes practice, but don’t be anxious. Carefully check with your pilot hole charts in order to make your selection. Also, always keep your hammer drill bits organized within a case. This will make choosing the proper size easier and much more intuitive.